Learn · Practice · 4 min read

How racing drivers learn a new circuit

A racing driver arriving at a circuit for a race weekend has very little time. Practice sessions are short, the tyres are limited, and by qualifying the driver must be within a few tenths of the car's limit on every corner. Even at a circuit they know, the car, the tyres and the weather are different from last year.

So drivers learn circuits in layers, before they ever drive a lap, and then they build speed in a careful order once they are on track.

Before the weekend: video and simulators

The first lap of a new circuit is usually driven on a screen. Drivers watch onboard videos of previous laps, from their own team and from others, to learn the order of the corners, the gear for each one and where the car is flat out. Many teams run detailed simulators that model the circuit to the centimetre, and a driver may complete hundreds of laps there before the car is even unloaded.

The simulator cannot teach everything. The real grip, the bumps and the way the track changes as rubber goes down all have to be learned on the day. But it means the driver arrives knowing where the circuit goes, and can spend the real laps on details.

The track walk

On the day before running starts, drivers and engineers walk or cycle around the circuit. It looks relaxed, but it is work. On foot, a driver can see things that are invisible at 300 km/h: the camber of the road, how high the kerbs are, where the surface changes, what lies beyond the edge of the track, and the landmarks that will mark each braking point and turn-in.

Reference points

A driver does not judge a braking point by distance. They judge it by what they see. Circuits have marker boards counting down to each corner, usually at 150, 100 and 50 metres, but drivers also use anything that will not move: a change in the tarmac, a crack in the barrier, a sign on a bridge, a shadow in the afternoon.

Every corner gets a set of these reference points: one for the braking point, one for the turn-in, one for the apex and one for where the car should track out. A lap becomes a chain of them, and a driver who has the chain memorised can drive the lap almost without thinking, leaving attention for the details that change from lap to lap.

Building up speed

On track, drivers build up gradually. The first laps are about checking that the circuit matches what they learned, and that the car does what it should. Then they start moving the braking points later, one marker at a time, and carrying more speed into the corners, until they find where the limit is.

Good drivers do this in a deliberate order. They do not attack every corner at once. They might push the braking in one corner while keeping the rest steady, so that if something goes wrong, they know which change caused it. A lap time is built from separate small gains, each one tested before the next.

The data

After every run, drivers sit with their engineers and the data. The car records the speed, the throttle, the brake pressure and the steering angle at every metre of the lap, and the team overlays one driver's lap on another's. A driver can see exactly where a teammate braked later, carried more speed or got on the throttle sooner, and take that back onto the track.

This is how drivers find the last few tenths. Most of a lap time is found by feel, but the final gains often come from a graph showing that the car was two metres off the ideal line through one corner, or waiting too long to accelerate on the exit of another.

Learning the conditions

A circuit is not the same all weekend. It gets faster as rubber goes down, slower when it rains or when the sun heats the track, and the wind can change which way the car slides in a fast corner. Drivers keep learning right up to qualifying, adjusting their reference points as the grip changes.

Learning a circuit in Lapdle

Lapdle's daily games follow the same steps in a smaller way. The circuit guides walk through each lap corner by corner, the Daily Quali shows which corner cost the most time after every attempt, and Make the corner puts you in one corner with one braking point to find. Coming back to the same circuit on a different day, with different conditions, shows how much of what you learned still holds.

The best way to learn a circuit is the same as for a real driver: find the order of the corners, pick your reference points, and then change one thing at a time.

More to learn